This Canon error 5011 is usually caused by a problem with the cartridge holder, which is trapped inside. Users are unable to scan due to a printer malfunction. However, Canon Printer Error Code 5011 Solution concepts into practice can be difficult. The issue could potentially be caused by a manufacturing flaw. Some of the solutions that are listed below to help you resolve the issue.
Fix Canon Printer Error Code 5011 Easy Steps
Before beginning the Canon Printer Error Code 5011 Solution procedure, we recommend that you carefully follow the steps outlined below to avoid problems and save time. These problems can be more difficult and time-consuming to correct. The procedure for resolving the Canon printer error code 5011 is simple and straightforward. Learn how to quickly get rid of:
Step 1: Turn on your Canon printer for the first time.
- Remove the power cord from the power switch first.
- Next, wait 10 minutes before plugging the power wire back into the Power switch.
- Finally, turn off the printer and carefully open the printer's lid to replace the Canon printer's ink cartridge.
- After making the changes, turn on the printer and close the printer lid again while it is initializing.
- Turn off the printer once more and long press the 'Power + Cancel' tab all at once.
- Press and hold the power tab while slowly releasing the 'Cancel' tab.
- Press the 'Cancel' tab at least four times before releasing both tabs at the same time.
Step 2: Examine the machine for any paper fragments.
The user must confirm that there are no paper bits stuck within the machine using this procedure. Make sure there isn't anything stuck within the machine, such as a piece of paper.
Step 3: Clean the Encoder Strip
If the above-mentioned solutions have not been successful in addressing the Canon printer error 5011 problem, you might attempt cleaning the encoder strip, which is located beneath the carriage. From left to right, the carriage moves.
Step 4: Try turning the printer off and on again.
For the next 10 minutes, disconnect the printer from the power source and then reconnect it to run a test. Lift the lid of your printer machine and turn it on while the lid is open.
Close the lid and see if the Canon support code 5011 problem has been repaired. If none of the above-mentioned solutions work, your printer machine will need to be repaired. If this solves the problem, wonderful; if it doesn't, you can contact the printer support staff.
