Pvc Furniture Board Could Be Cleaned As Such

Comments · 43 Views

The surface of pvc furniture board is glossy and soft. There are brown, green, white, gray and other colors to choose from. The product is made of high-quality materials, exquisitely made and widely used. Performance characteristics: Soft and cold-resistant, abrasion-resistant, acid-resist

The surface of pvc furniture board is glossy and soft. There are brown, green, white, gray and other colors to choose from. The product is made of high-quality materials, exquisitely made and widely used. Performance characteristics: Soft and cold-resistant, abrasion-resistant, acid-resistant, alkali-resistant, corrosion-resistant, tear-resistant, excellent weldability, and physical properties better than other roll materials such as rubber. Used in chemical industry, electroplating, electrolytic cell lining, insulating cushion, train, automobile interior decoration and auxiliary materials. Because of its flexibility and diversified colors, pvc soft boards are generally used outdoors, sports venues or playgrounds.
PVC soft board is mainly used for commercial applications, such as sports fields, playgrounds, supermarkets, etc. Because of its elasticity and free colors, it drives a good decorative effect and also brings a lot of joy. But this requires maintenance of the pvc soft board, what should be done specifically, the following points should be paid attention to the maintenance of the pvc soft board:

  1. Remove all kinds of dirt on the ground in time, degrease, pour the stock solution of water-based degreaser on a towel and wipe. Large areas of grease can be cleaned with a floor scrubbing machine; black offset printing can be done by telling a polishing machine to add a white polishing pad for polishing. For long-time black offset printing, you can pour the strong black offset remover directly on the towel and wipe it; glue or chewing gum, use a professional strong glue remover to directly pour on the towel and wipe off.
  2. It is forbidden to soak the floor in water. Although some floors use waterproof glue to cut off the water source, whoever soaks it for a long time will seriously affect the service life of the plastic floor. Use a water absorber to absorb the water in time during the cleaning process.
  3. Shorten the maintenance period and increase the waxing frequency of high wall wax for places with a lot of people and wear.
  4. It is forbidden to use hard and rough cleaning tools, such as steel wire balls, scouring pads, etc., to prevent sharp objects from colliding with the elastic floor.
  5. Foot pads can be placed at the entrances of public places with high traffic to prevent sharp objects from colliding with the elastic floor.

If you are interested in PVC foam sheet manufacturer, welcome to contact us!