The 12v Deep Cycle Gel Battery is a deep cycle battery that contains electrolytes suspended in a gel solution between lead plates. Since gel batteries never overflow, they are sometimes referred to as non-spillable batteries, dry batteries, or maintenance-free gel batteries. Batteries are commonly used in motorcycles, wheelchairs, and radio communications.
You can use the gel battery charger to charge the 12v Deep Cycle Gel Battery. Constant voltage charging is one of the best charging methods. You can do it by one of the following two methods.
Fast charging (cycle charging)
Follow the manufacturer's insertion instructions and place the battery on the gel battery charger.
Turn on the charger of Lead Acid Battery Manufacturers and charge the battery until the voltage on the terminal reaches 58 degrees Fahrenheit (20 degrees Celsius), the voltage of each battery cell reaches 2.40 to 2.45 volts (12-volt battery voltage is 14.4 to 14.7 volts) .
Keep the battery at this voltage until the charging current drops to 0.01 x C ampere (C is the battery's ampere-hour rating).
Stop charging the battery in a fast-charging mode or switch to a floating charging mode.
Floating charge (backup service)
Place the battery on the gel battery charger according to the manufacturer's instructions.
Turn on the charger and charge the battery with a constant voltage of 2.25 to 2.30 volts per cell (on a 12-volt battery at 58 degrees Fahrenheit (20 degrees Celsius), a constant voltage of 13.5 to 13.8 volts. Your current level.
After the battery is fully charged, stop charging and then remove it from the gel battery charger.