F2159 PEX Crimp Fitting repair method:
   When the damaged part of the outer wall of the PE pipe shows a broken pipe wall or a hole less than 0.1m in length, use a scraper to completely remove the broken pipe wall or hole. Clean up with cyclohexanone within 0.05m of the removed part, and brush the plastic bond with good water resistance. Then remove the arc-shaped plate with the damaged area twice from the corresponding part of the same pipe, apply adhesive on the inner wall to buckle the damaged part, and fix it with lead wire. If there are ribs on the outer wall of the pipe, remove the ribs within 0.05m around the damaged part, scrape it without ribs, and take the same method as above to remedy.
   When the outer wall of the PE pipe of PEX Fittings Wholesale has local or small cracks or holes within 0.02m, the water in the pipe can be drained first, and the damaged parts can be cleaned with cotton yarn, and then the base surface can be brushed with cyclohexanone. Plastic adhesive with good water resistance; remove the plates of similar shapes and sizes from the corresponding parts of the unused pipes, bond them, wrap them with geotextiles, and fix the soil after curing for 24 hours.