Because trucks often pull goods, in order to achieve maximum benefit, parts are updated frequently. However, many businesses make a fuss about accessories and use defective products as branded accessories, which makes truck drivers a headache. How to choose truck parts? The editor presents the following buying tips for everyone:
- See if the trademark logo is complete
The outer packaging of authentic truck parts is of good quality. The handwriting on the box is clear and the overprint color is bright. The box and bag should be marked with the product name, specification, model, quantity, registered trademark, factory name, address and telephone number, etc. Some manufacturers also put their own marks on the accessories. Some important parts such as generators, distributors, fuel injection pumps, etc., are also equipped with instruction manuals, certificates of conformity and inspector stamps to guide users in the correct use and maintenance. Recognize carefully to prevent buying fake or shoddy products.
- See if the geometric dimensions are deformed
Some truck parts are prone to deformation due to improper manufacturing, transportation, and storage. Therefore, when inspecting, you can roll the shaft part along the glass plate to see if there is light leakage at the joint between the part and the glass plate to determine whether it is bent. When purchasing the clutch driven disc steel plate or friction plate, you can use the steel plate and friction plate. Hold it in front of your eyes and observe whether it is warped. When purchasing an oil seal, the end face of the oil seal with a frame should be in a perfect circle, which can be fitted with the flat glass without bending, and the outer edge of the oil seal without a frame should be straight. Hold it by hand to make it deform, and it should be able to return to its original shape after letting go. When choosing various types of gaskets, pay attention to checking the geometric size and shape.
- See if the joint is flat
During the transportation and storage of truck parts, due to vibration, bumps, burrs, indentations, breakages or cracks are often generated in the joints, which affect the use of parts. Pay attention to inspection when purchasing.
- See if the surface hardness meets the standard
The surface hardness of each mating part has specified requirements. After confirming the purchase and discussing with the merchant, the stubble of the hacksaw blade can be used to test and delineate. If there is no scratch when scratching, it means that the hardness is high. After scratching, the hardness is higher if there is a slight scratch. If there are obvious traces after scratching, it means that the hardness is low (be careful not to damage the working surface during the test).
- See if the protective surface is intact
Most of the accessories are coated with a protective layer when leaving the factory, such as the piston pin and bearing bush are protected with paraffin, the surface of the piston ring and cylinder liner are coated with anti-rust oil and wrapped with wrapping paper, and the valve, piston, etc. are soaked in anti-rust oil and then packaged in a plastic bag. If it is found that the sealing sleeve is damaged, the packing paper is lost, or the anti-rust oil or paraffin wax is lost during the purchase, it should be returned.
Taizhou Benwo Auto Parts Co., Ltd. is a Euro Truck Parts supplier with a variety of auto parts products. Welcome to visit our official website.