Some installation methods about vehicle monitoring

The four-way monitoring driving record is suitable for driving assistance of passenger and truck engineering vehicles

In fact, as long as you have time and a little hands-on ability, this set of things can be installed by yourself; there is no need to spend money on the electrician to install it.

The things you install yourself will be more in place and more detailed; if there is a problem in the follow-up, you can quickly find out the problem

benefit:

First: the cameras can be distributed at will as long as you want to monitor the place can be arranged

Second: there is evidence of touching porcelain, lost goods, and stolen goods, which saves a lot of trouble

Third: When driving, the situation of other vehicles in the left, right, front and rear can be seen at a glance, which is much more convenient and safer.

Fourth: the reversing image is also convenient and practical

Fifth: Some monitoring systems also have GPS positioning. If you lose your car, you can keep track of your whereabouts at any time.

Sixth: Some monitoring systems also have 3G/4G remote video real-time viewing to facilitate understanding of the situation in the car, especially suitable for car owners to control their own vehicles

Recommended installation steps:

1. First confirm the position of each camera and the routing path;

2. Confirm the placement position of the host, the host panel should face the convenient remote control position as much as possible, and confirm the placement position of the display screen;

3. Do not fix each camera temporarily, the host and the display are connected to the host

4. When laying out the video extension cable, if it is necessary to realize the full-screen enlargement of the reversing screen in reverse gear, please connect the positive pole of the reversing light or the reverse switch to the alarm line;

5. Arrange the car display; Ceiling display installation method: first remove the display floor, fix the floor, and then fix the display on the bottom plate;

6. Connect the power cords of the car video recorder and the car display; use a test pen to confirm whether the voltage of the power cords of the video recorder and the display is correct; plug in the power cords of the display and the host, and turn on the power.

7. Wait for the boot to complete, display the four divisions, then plug in each camera, adjust the angle and position of the camera, and fix it.

8. Display operation and debugging, complete step 1:

First, confirm the position and wiring path of each in-vehicle camera;

The truck is generally installed with four cameras, which means that the front is advanced; the left and right are rearward; the rear is rearward for reverse. In addition, the fuel tank is also the focus of monitoring.

Passenger cars generally have four cameras; the front faces forward, the back faces backward, and the interior is for the driver or passenger or for the door, etc.

In-vehicle cameras in different directions and positions are different

With ten years of international experience, MacFaith E-Technology specializes in developing automotive surveillance systems and manufacturing mobile digital video recorders (DVRs). We provide domestic and foreign customized video recording and monitoring solutions for passenger cars, school buses, refrigerated trucks, muck trucks, garbage trucks, etc. By integrating DMS and ADAS systems, our solutions are designed to improve operational efficiency, enhance driver awareness, and most importantly, maximize customer safety.