When it comes to die-casting zinc alloys, there should still be a significant number of people who are not familiar with the technology that goes into this process. Die-casting zinc alloys is a casting method that is utilized frequently. There are certain circumstances that can arise during the process of opening the mold for zinc alloy die-casting, and these can lead to certain flaws in the finished product. Molten metal may splash as a result of the following causes: if the mold is not opened quickly enough

The surface of the cavity has a rough texture, or there are a variety of items in the cavity. Make the necessary adjustments to the length of the push rod. On the surface of the die casting, there are small holes or pores. The reason for this is that there is an excessive amount of lubricant, and the vent hole is clogged. Because of the intense competition in the market, natural selection will inevitably take place; therefore, it is important to differentiate yourself from your competitors.

Lubricating oil needs to be sprayed during production because the products that are die-cast by the die-casting machine have a high temperature and some products have a tendency to stick easily to the mold while die-casting. This is why lubricating oil zinc alloy die casting supplier is necessary. Because of this, the specifications for the conveyor belts that are used for the production of metal die-casting products must include the ability to withstand high temperatures as well as the presence of oil.

High temperature resistant canvas belt conveyors utilize conveyor belts that are resistant to heat. Different accessories are added in accordance with the products of the customer in addition to other factors. In a metal die-casting workshop, the products have a high temperature after the casting process has been completed. Skateboards are fastened to the highest point of the rack, and they are able to gain access to the product box automatically. When the product has reached the desired temperature, the skateboards will move the product to the next location on the belt.

Why is it that the surfaces of castings cannot be anodized in the same way that other materials can be?

After the anodizing process, there will be a significant amount of floating dust on the surface, which will have a negative impact on the anode's surface die cast parts quality. During the removal of silicon in the pre-treatment phase, we discovered that die-casting dense material is very different from aluminum extrusion, forging, and stamping, and has a high silicon content. Die-casting parts are not anodized in the majority of cases because die-casting dense material is very different from aluminum The film thickness is extremely high, coming in at over 100 um. When it comes to choosing die-casting factories for collaboration, customers run into some difficulties. The second factor that it is determined by is that it is determined by the structure of the mold. The mold for the zinc alloy product has a structure that is similar to that of a die-casting mold.