Customized RC Model Cables Product Information Servo is a position (angle) servo drive. It is suitable for control systems where the angle needs to be constantly changed and can be maintained, and is widely used in high-end remote control toys such as airplanes, submarine models, aviation models, remote control car models, and remote control robots. Servo cable, as a special cable for servo system, plays a vital role. A good cable can bring great work efficiency to the servo system. Features Servo cables have the characteristics of high mechanical strength, wear resistance, high flexibility, aging resistance, crack resistance, mildew resistance, moisture resistance and acid and alkali corrosion resistance. It has soft properties at low temperature and can be used in special environments such as electronic appliances. With the wide application of modern automation equipment, servo cables are constantly improving with the needs of the market. For example, the cables on the market are divided into round and flat. The internal structure of the servo is shown in Figure 1 below, which consists of a control circuit, a motor, a set of gears, a housing, and three connecting wires to the outside. Figure 1锛?/strong Yes, that's right, there are 3 essential connecting wires in the construction, and there are many different types of servos with different specifications. About us Shenzhen Goowell Electrical Co., Ltd. is a professional manufacturer of servo connection cables, the following is a detailed introduction to several servo on the connection of the external connection cable. Product 1: This is 9g servo cable with small servo. The connection cable specifications are: JR plug 26AWG brown red orange 3Pin PVC and wire, wire temperature resistance 80 鈩? the length is customized according to different models. Product 2: The servo wire used on this RC car. The specification of the servo wire is: 26AWG black, red, white and yellow heal PVC 5Pin parallel wire, the wire is temperature resistant to 80鈩? the length can be customized according to different models. Doubts answered. 1. What do the 3 wires on the servo mean and what do they do? A: The three wires on the servo are connected to the receiver, where orange is the signal wire, red is the positive power supply, and brown is the negative power supply, which transmits the data to the servo. 2. What is the role of the five-color servo cable? A: This five-color servo wire, two wires are driving the DC motor, the other three are potentiometer positive and negative power supply, and a signal line. This servo is generally used in robots and RC cars.Customized RC Model Cables website:http://www.shusb.net/radio-control-models-connecting-wire/rc-model-cables/