Setting up your WiFi doesn't have to be difficult. Don't worry if you recently purchased a Tenda router; it's simple and quick to set up. Here's a quick guide to help you set up your Tenda N300 stress-free.

Unpack and attach everything.

Remove the Ethernet cable, power adapter, and Tenda N300 router. Connect the router to a power outlet. Now attach your modem's Ethernet cable to the router's WAN port, which is often blue. After turning it on, watch for the lights to stabilize.

Join the router network.

Navigate to the WiFi settings on your laptop or phone. The sticker on the back of the router will have the default network name (SSID) inscribed on it. Connect by tapping on it.

Go to the setup page.

Launch any web browser, such as Microsoft Edge or Google Chrome. Enter 192.168.0.1 (or tendawifi.com) in the address bar and hit Enter. The Tenda router setup page will open as a result.

Make a WiFi name and password.

You will be prompted to create a new WiFi name and password as soon as the page loads. Select something that is simple to recall but difficult for others to figure out. Click Save or OK.

Configure the admin password.

Make a password to access the router settings page for further security. This prevents unauthorized users from altering your WiFi configuration.

Complete and re-connect

The router can restart after everything has been saved. Utilizing the updated WiFi name and password, reconnect your devices.

You can now browse, stream, and work uninterrupted because your Tenda N300 setup is complete. Your Tenda router setup will be completed in a matter of minutes if you properly follow these instructions. Go to our website to know more.